The first thing I do when using CA is take the cap off the de-bonder, and have it within reach.
Alex
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Not enough viscosities. http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=47516 |
Page 1 of 1 |
| Author: | dofthesea [ Fri Mar 25, 2016 7:29 pm ] |
| Post subject: | Not enough viscosities. |
I might need to buy a few more viscosities. Attachment: IMG_5314.jpg
|
|
| Author: | Clay S. [ Fri Mar 25, 2016 7:48 pm ] |
| Post subject: | Re: Not enough viscosities. |
On some CAs you can fine tune the viscosities by mixing different ones together. I don't know if this is true of Starbond. |
|
| Author: | Alex Kleon [ Fri Mar 25, 2016 8:24 pm ] |
| Post subject: | Re: Not enough viscosities. |
The first thing I do when using CA is take the cap off the de-bonder, and have it within reach. Alex |
|
| Author: | saltytri [ Sat Mar 26, 2016 7:56 am ] |
| Post subject: | Re: Not enough viscosities. |
dofthesea wrote: I might need to buy a few more viscosities. No, what you really need is some GluBoost! |
|
| Author: | Hesh [ Sat Mar 26, 2016 9:14 am ] |
| Post subject: | Re: Not enough viscosities. |
Anyone else remember what Madonna did to Sean Penn while he was sleeping with a bottle of CA.....  Great selection David! |
|
| Author: | Quine [ Mon Mar 28, 2016 11:48 am ] |
| Post subject: | Re: Not enough viscosities. |
Goldilocks would freak out at that many options 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|